Stitch N Wash sheets (8 ½" x 11") for feeding through a printer for paper/foundation-piecing designs and templates. For applique, you can print directly on the stabilizer instead of tracing.
Stitch N Wash is a 1.5 oz tear away stabilizer which is ideal for airy, open work type embroidery designs on light cottons and linen. It's unique because it is made up of half soluble and half non-soluble fibers. By wetting the design once it is complete the stabilizer is easily torn away without distorting stitches or harming the delicate fibers of heirloom quality fabrics. The design will retain the non-soluble part of the stabilizer throughout the life of the garment keeping the embroidery looking smooth. Any remnants of the stabilizer around the design will wash out in the laundry.
- Easy to remove from around delicate embroidery or machine stitching.
- Won't shadow through light colored fabrics.
- Eliminates countless hours of "picking" out stabilizer remnants.
- Super stable and will support about 8,000 stitches if the design is well-digitized.
To use Stitch N Wash:
- Hoop one layer of the stabilizer within the frame with the garment or fabric. Be sure to use a piece at least one inch larger than the outer perimeter of the embroidery frame.
- Embroider the design.*Tip- If the design is denser than 8,000 stitches or if it is a poorly digitized design (too many stitches for design's size), float an additional layer of Floriani Stitch N Wash between the hoop and the bed of the machine for each additional 8,000 stitches for added support!
- Remove the hoop from the machine and from the garment.
- Wet around the edge of the design using a sponge, foam paint brush or envelope sealer.
- Tear away as much of the Stitch N Wash as possible.
- Stabilizer remnants will wash out in the laundry with a mild detergent and agitation.